Shandong Luyisheng Building Materials New Materials Co., Ltd.

< : : >The sales volume of emery wear-resistant floor materials in Luliang City is No. 1
Keywords: wear-resistant floor, wear-resistant floor construction, colored wear-resistant floor materials, floor wear-resistant materials
Resistance Requirements for cement concrete construction in grinding floor construction:
For one layer of ground, the lime soil cushion or sand and gravel graded cushion should be compacted and leveled to prevent uneven settlement after use. The ground cracked.
For floors, the base surface should be cleaned and the interface bonded to prevent hollowing and cracking of the surface layer.
Before pouring concrete in wear-resistant floor construction, pipeline layout should be done well, and other embedded parts should be reserved, and excavation of the floor after completion should be avoided as much as possible.
. Support and lay the formwork according to the designed elevation, ensuring that the edges of the formwork are aligned and the formwork does not run during paving.
. Arrange the labor force organization. According to the phased construction plan, use flow operations to organize a number of production teams, divide the entire project into several construction sections, and each process is closely connected. (Concrete emery wear-resistant powder manufacturer phone number:)
Concrete pouring should be carried out in separate warehouses and in order. It should be poured to the design elevation at one time as much as possible to avoid hollowing of the surface layer and cushion caused by two pourings.
When paving concrete, make sure it is vibrated tightly and no stones are exposed on the surface. Finally, use a roller or scraper to level the concrete surface, and use a wooden trowel to rub out the slurry on the edge of the formwork.
Arrange a dedicated person to use a level to check the flatness at any time to confirm that the flatness of the concrete surface meets the requirements (general deviation [banned word]).
. The construction of wear-resistant floor requires that the concrete grade should be above C, the flatness deviation should be within [forbidden words], the slump should be within ~, and the paving thickness should be above c.
There are many cement-colored wear-resistant floor materials on the market, and there are also many colored wear-resistant floor materials. The quality is different and the price is different. The reason for the big difference in price is mainly because Whether the emery content in emery wear-resistant materials reaches the standard, and whether the cement is of high grade, the emery content of low-end floor wear-resistant materials is between. In this way, the wear resistance is undoubtedly reduced a lot, and the emery resistance The hardness of the surface of the floor grinding material is not high, and the service life is greatly shortened. It cannot extend the service life of concrete at all. Therefore, it is recommended that consumers understand the emery manufacturer and quality before making a choice, and do not blindly Free money!
Liu Lulu:
:
Address: No. Qizhou Road, Huaiyin District, Jinan City
Website::.cc
:..
Stepli also has a WeChat public account. Please search the Staple Voice r official account to obtain the latest knowledge and information on the flooring industry. Everyone is welcome to pay attention!